|
Industrial Fuels & Solvents
1. Fuel Oil
2. Speciality Solvents
|
INDUSTRIAL FUEL(DIVYOL®- 41):-
|
Most of the industries like Steel Plants, Glass
Industries, Chemical Plants etc., carry out process at high temperature. These
industries normally use fuel as burning media in Boilers & furnaces. Looking
toward present requirements, M/s. Gandhar Oil Refinery (I) Ltd has developed
high grade product with high calorific value to suit above requirements. |
| |
Advantages of DIVYOL®–41 |
1. Low ash content/carbon controls pollutions & keep the systems clean. |
2. Low sulphur content controls corrosion & Air Emission. |
3. Helps quick firing because of Low Flash point. |
4. Low viscosity reduces handling problem. |
5. High calorific value imparts high efficiency to fuel. |
6. Low pour point helps handling during all seasons. |
| |
| S.NO |
TEST PARAMETER |
SPECIFICATIONS |
| 01. |
ACIDITY, INORGANIC |
NIL |
| 02. |
ASH, WT %, |
0.02 MAX |
| 03. |
CARBON RESIDUE, WT % |
1.25 MAX |
| 04. |
POUR POINT, º C |
+6 |
| 05. |
FLASH POINT (COC) |
40 MAX |
| 06. |
KINEMATIC VISCOSITY, CST |
4.00 – 11.00 |
07. |
WATER CONTENT, V%, |
0.35 MAX |
| 08. |
TOTAL SULPHUR WT%, |
1.25 MAX |
| 09. |
CALORIFIC VALUE K/CAL/KG |
10, 650 – 10750 |
| 10. |
DENSITY @ 29.5º C |
0.838 – 0.875 |
|
| |
SOLVENTS |
DIVYOL® Solvents are used for preparation of certain rubber
mixes cements, adhesives, thinner for varnish & paint industries, printing inks
formulations were quick drying is required, it is used as diluents to lacquer,
enamels, also used in dry-cleaning were quick dry cleaning is required.
These are available currently in 2 grades
1) DIVYOL®51
2) DIVYOL®161 |
| |
| S.NO |
TEST PARAMETERS |
SPECIFICATION OF
DIVYOL®-51 |
SPECIFICATION OF
DIVYOL®-161 |
01. |
COLOUR-VISUAL |
CLEAR WATER WHITE |
CLEAR WATER WHITE |
02. |
SP.GRAVITY @29.5°C |
0.670 – 0.720 |
0.690 – 0.740 |
03. |
DISTILLATION RANGE
IBP
FBP |
50°C - 75°C
115°C – 130°C |
70°C - 80°C
170 °C - 200°C |
04. |
RECOVERY |
98% MIN |
97% MIN |
05. |
KINEMATIC VISCOSITY, CST @ 40
°C |
0.50 – 1.75 |
2 –3 |
06. |
AROMATIC CONTENT % BY V/V |
4.5% MAX |
5 MAX |
07. |
ANILINE POINT |
60 - 65°C |
60 –65 |
08. |
SULPHUR % BY MASS |
0.05 % MAX |
0.05 % MAX |
09. |
RESIDUE ON EVAPORATION
(MG/100 ML) |
4.5 MG.MAX |
5 MG.MAX |
10. |
NON VOLATILE MATTER |
< 0.01 % |
< 0.01 % |
11. |
MOISTURE CONTENT |
0.01% MAX |
0.01% MAX |
12. |
ACIDITY/ALKANITY |
< 0.01 ML |
< 0.01 ML |
13. |
COPPER COROSSION TEST |
NEGATIVE |
NEGATIVE |
14. |
CLOUD & POUR POINT |
< 0°C |
< 0°C |
|
| |
| |
Specification Sheet is also available in PDF format.
|
|
| |
|
| |
